A Watermaker Made For Adventure
Traditionally used to desalinate ocean water from a boat, we simplified watermaker technology, made it portable, and brought it to your campsite.
A Custom High-Pressure System
The heart of Access is a custom high-pressure reverse osmosis system developed entirely in-house. Traditional watermakers were designed around permanent installation. Access was designed around portability from the beginning.
Certified Performance
- Power System
- 200 W
- 210 Wh integrated battery
- AC/DC Adapter Included
- Continuous Operation
- 8 hr run time
- AC or 24v DC
- 10 amp
- Battery Power
- 1-3 hr run time
- Charges from 3 – 12v DC
- 3 amp
- Water Production
- 6 GPH salt water (22 LPH)
- 12 GPH fresh water (45 LPH)
- Weight
- 25 pounds (11kg)
- Dimensions
- 20 x 9 x 8 inches
- Natural Water Sources
- Freshwater
- Brackish water
- Saltwater
- Consumable
- RO Membrane
- Intake
- 6 ft lift
Designed Around Portable Power
Portability isn't just about weight. It's also about power. Access was engineered to operate at approximately 200W, allowing it to run from many of the power sources already found aboard boats, in vehicles, and inside portable power stations. The result is a watermaker designed to move beyond permanent installations.
Continuous Operation
For extended runtime, Access can operate from a standard AC outlet or a compatible 24V DC power source.
Battery Charging
The integrated battery can be charged from AC power, DC power, solar-powered battery systems, and portable power stations. A 12V source can charge the battery, while higher-voltage sources can reduce charging time. A fully charged battery provides approximately 1 hour of runtime in typical saltwater conditions (~32k ppm).
Power System
- Approximately 200 W operating power
- Integrated 210 Wh battery
- AC Adapter Included
Built for Real-World Water Conditions
Ocean water, brackish water, freshwater – every source presents different challenges. Access combines high-pressure reverse osmosis, onboard sensors, and adaptive controls to optimize operation across a wide range of water conditions. When processing seawater, Access is designed to produce up to 6 gallons of drinking water per hour, with higher production rates possible in freshwater environments.
- Up to 6 ft intake lift
- 25 lb portable system
- No permanent installation required
- Adapts to varying source water conditions
- Automatic control of pressure and flow
Rethinking How Watermakers Are Built
Watermakers have historically been expensive. We set out to change that.
By engineering our high-pressure system, control architecture, and manufacturing approach from the ground up, we designed Access with scale in mind from day one.
Our goal is simple: reduce the cost and complexity of personal water-making and make it accessible to far more people.
